Home › Forums › Printing Discussions › General Printing Topics › 54" or 60" Printer, advice needed please?
-
54" or 60" Printer, advice needed please?
Posted by Elliott j willis on 11 February 2018 at 12:16So obviously I will depend on what your main type of work is but for those with a 54" printer how often are you finding yourself wishing you had the extra 6" of a 60?
Cant decide if the saving is going to turn into frustration, my use would be general signage, banners, vehicle graphics and wraps (part wraps mainly).
Iain Pearson replied 7 years, 9 months ago 6 Members · 6 Replies -
6 Replies
-
If you have the option then always go as Wide as you can. Doesn’t mean you have to buy Media that wide etc..
We do quite a few printed 10ft x 5ft sheets. With 54 this means a join somewhere. Just adds extra material and time to the job.
-
Ran 64" for the last two machines. Great for printing 10×5 foot panels (frequently print and edge wrap full panels)…and getting a full 1.5m high on banners after hemming. Bigger the better.
Obviously, you will need a laminator that is at least as wide as your printer! -
I asked the same question year and a half ago. Went for 64” personally. Didn’t regret. Especially for banner and wrapping.
-
I have 60" latex, though 99% of the time I’m printing on 54" media. I can do unlaminated stuff at 60" but it’s not often required. My laminator is only 1400 so that limits me there.
-
My first Latex was a 60 but only ever used it at that size for a few 1500mm banners never anything else so when replaced changed to 54 and never missed it, lets be fair a 50m roll at 1370 is heavy enough to manage if your a one man band without going bigger.
Plus with the HP310 54 inch its two 13amp plugs so no special 16amp sockets needed so can move around as you like.
-
Ive just ordered a new 54" HP Latex.
95% of my work can all be taken care of with a 1370mm roll, and the stuff that cant, i outsource to a local printer.
As previously mentioned, you will have to purchase a cutter and laminator to complement your printer , but as kevin says, with a 54" latex, its 2 13a plugs so no additional wiring required if your premises don’t have a 16a supply.At the end of the day, its a personal preference, if you think you will need the extra width on a regular basis, then go big, if not, then 54" will take care of most things :thumbsup:
Good luck :smiles:
Log in to reply.
