• PCUT Vinyl Cutters

  How can I stop myPcut cs1200 cutting in reverse and mirrored

  Posted by Emma Howlett on 23 September 2015 at 17:52

  Hello,

  Hope someone can help. My pcut cs1200 is cutting in reverse and mirrored. Can someone please tell me how to make it cut normal?
  This has only started doing this since I change laptops I use and had to reinstall the drives.
  I tried to call the manufacturer but they were no use as the machine is just out of warranty.

  Thanks in advance of you can help.

  Emma 🙂

  Emma Howlett replied 10 years ago 2 Members · 3 Replies
• 3 Replies

• 

  Tim Cowlishaw

  Member

  23 September 2015 at 17:55

  what software are you using ?

• 

  Emma Howlett

  Member

  24 September 2015 at 15:58

  Using flexipro 8.1

• 

  Emma Howlett

  Member

  27 September 2015 at 20:30

  So I have finally sorted my machine. So thought I would share what the issue is and how to sort it… Hope this makes sense to everyone as I didn’t do it but have been told how they solved it.

  There are 3 different drivers depending in the country your in. There’s a CS1200, a CS1200G and a CS1200F. You need to make sure the correct driver is installed on your pc/laptop for the country your in.
  These drivers weren’t supplied on the disk with the machine, so the guy I had solve this had to get the drivers off the website that I got the machine from. The CS1200F works for people on the UK.

  Hope this helps someone else.

Log In to Reply