-
Versacamm printing problems
Hi sorry guys I have another question, my versacamm sp 300i is giving me problems when I print and cut.im using a gloss vinyl and its printing two much ink,and leaving little tiny ink balls, I’m using the gen vinyl proflie in versaworks and have tried putting the temp up on the heaters as it’s still a little wet when printed but that does not help, I changed the media to photo paper and the little ink balls have gone but the print is still a bit pachey if you look close enough , any help would be great
-
4 Replies
-
The generic vinyl one is terrible for overloading the material with ink.
I always use the "Oracal 3164" profile on our SP540v machine – gives a much better finish. Failing that try metamark md5
Andy
-
Nice one for the reply, can I get that profile from their website ?
Thanks Danny
-
Hi Danny,
You’ll get them all on http://download.rolanddg.jp/en/3rdmedia … index.html
Another useful tip is if you cant find the profile you want (if you wanted a specific one) then try the 54" model as they are in essence the same, in your example they would be the SP540i ones.
Andy
-
Cheers Andy i will give them a try
Log in to reply.