-
Polycarbonate Graphic Overlays ..help please
evening all
A long standing customer of mine has asked me to produce some polycarbonate decals (125 micron) that need to have a 3m backing.
They also need to be cut/plotted somehow with curved edges .
The equipment i have is..
Versacamm 540
Gerber edge
Screen printing set up
I i’ve spoken to one rep and he’s advising me to buy a UV printer and flat bed cutter ..65k ish 😮
I would greatly appreciate any advice
cheers
Rob
-
3 Replies
-
You can buy polycarbonate for the edge, reverse print, back with sliver or white etc an laminate on the 3m adhesive and plot
-
quote Ian Johnston:You can buy polycarbonate for the edge, reverse print, back with sliver or white etc an laminate on the 3m adhesive and plotThanks for the quick response
would the plotter be up to cutting it ?
also there is going to be a high volume of these decals , Suppose i could invest in another Gerber .
I will check the Spandex site now for the polycarbonate
cheers
edit .. £18 mtr !!!! 🙁
that might out price the job
-
Hexis sell the polycarbonate for edge printing. It’s slightly textured on the non print side (a bit like a anti glare finish really).
Hexis DC2550/380mm-pattern 2 & around £10.40 PM
Log in to reply.