• Roland Printers

  Overspray on black

  Posted by Stephen Ingham on 11 August 2011 at 14:37

  Hi all, can anyone shed any light o a problem i have at the momeent please?

  I have a SP300 and when i print black it seems as if it is over spraying past the point the black part finishes?

  Any help or advice is much appreciated

  Cheers
  stephen

  ---

  Attachments:

  

  Stafford Cox replied 14 years, 1 month ago 4 Members · 5 Replies
• 5 Replies

• 

  Chris Wool

  Member

  11 August 2011 at 14:50

  looks like static have you printed banner or pull ups lately

• 

  Stephen Ingham

  Member

  11 August 2011 at 14:53

  Hi Chris, i haven’t, just printed vinyl.

  I have just changed from oracal 3164 to oracal 3195g and that is the result…

• 

  David Rowland

  Member

  11 August 2011 at 15:46

  any what happens other medias?

• 

  Stephen Ingham

  Member

  11 August 2011 at 20:12

  Hi guys, i think what i will do is tomorrow i will switch back the vinyls and try see what the results are…

  cheers
  stephen

• 

  Stafford Cox

  Member

  15 August 2011 at 11:24

  Am I right in think there is an overspray of magenta in there too or is it just the photo that’s adding that. I’ve seen many things cause that:

  Static, as mentioned.
  Print head (hopefully not)
  Head cable (my first guess)

  I’m not familiar with that particular printer yet but I would try swapping head cables around to try and move the fault to another colour. Obviously, do not attempt this unless you are familiar with doing such hardware repairs, you could cause mroe damage if it’s done incorrectly.

  Stafford

Log In to Reply