-
Advice on creating Roll-up Banner stands please?
Hi all wonder if someone could help me. Have to do some roll up banners from the stands. I used to do them a while back and have forgotten the recommended white part and the end for the cassette.
hope someone knows this and can help.
Kind regards
Chris
:police: Mod-Edit
* Please refrain from posting links to ANY eBay sale or reference to eBay listings.
* Posts ignoring this rule will be completely removed..Please take a moment to look over our Board Rules.
-
11 Replies
-
sorry chris can’t work out what you want.????
-
you need about 100mm of extra to go into the cassette
-
I usually allow 150mm. No prob’s with that.
-
Not to turn this into competition, but I get away with 70mm on 2000×850 ones 🙂
-
quote Robert Kulawik:Not to turn this into competition, but I get away with 70mm on 2000×850 ones 🙂I beat you! 50mm bottom, 15 top 😎 😎
Guess it depends on the kind of rollup.
-
Ah, priceless 5mm. He who dares wins! 😉
-
i got away with zero once as i trimmed the wrong end, took 15mm of the pole. 😀
-
quote Chris Wool:i got away with zero once as i trimmed the wrong end, took 15mm of the pole. 😀
Oh- I have been there! :lol1:
-
well I did the opposite
had to add 50mm to the post! -
So nobody’s perfect then
-
I usually add extra background to account for this then add 50mm of white at the bottom, that way if I make a mistake cutting I’ve a bit left to account for it.
Learned the hard way though as I had to cut a bit off a pole after making it too short once 🙂
Steve
Log in to reply.