-
Roland SP-540V Not cutting properly
Hi all,
My Roland SP-540v isn’t cutting correct. When i export an Sp file to cut with the cut lines around it, it shows up in versaworks and some of the cut line wont be there. It is meanly at the bottom of the letters. Anyone any ideas of what this could be??Nicholas
Attachments:
-
12 Replies
-
quick guess, the eps page border is to small and clipping the cut path.
-
Have you tried zooming in on the file in versaworks, sometimes I get this issue but the wee red buggers are actually there on closer inspection.
-
I checked the page size and its OK, I have zoomed away in and they still aren’t there.
-
have you done a test cut and are those points missed ??
-
I’m with Chris on this one cause its happened to me before 😀
-
YES its got to be EPS margin I set mine at 1.00mm
-
Cheers everyone. My EPS margin had changed to 0mm and I changed it to 1mm. Problem solved. Thanks for the help.
-
Where do you adjust the eps margin 😳
-
Go to Edit, Queue A or B Settings (which ever you use), click file format on the left hand side and it will be at the top. Adjust to suit.
-
strange, just checked mine and it is set to 0.0mm but has always cut fine. You get it sorted Nicolas?
-
Yes all sorted now Chris. Mine was set at 0.0mm as well and when I changed it to 1.0mm it solved my problem.
-
I was advised by Roland to set it to 0.5mm and never had a problem.
Log in to reply.