• Mimaki Printers

  Mutoh Engineer

  Posted by TimFenn on 14 September 2009 at 11:50

  Hi,
  I’m desperate for a decent engineer in the Norfolk/Suffolk area.
  Can anyone help?

  Regards
  Tim

  Kate Griffiths replied 16 years ago 1 Member · 2 Replies
• 2 Replies

• 

  Kate Griffiths

  Member

  14 September 2009 at 12:21

  Hi Tim,

  I have just spoken to one of our print technicians, and he is having a look at that error message for you.

  Kate

• 

  Kate Griffiths

  Member

  14 September 2009 at 12:37

  Hi Tim,

  Do these checks in this order;

  1. Check error history from "Test 7: Record" of self-diagnostic function.

  2. Set the number of endurance running cycles to 50 or more from "Life 2: PF Motor" of self diagnosis function, and check if X motor error" occurs.

  3. Check "Encoder PF" from "Check 2: Test" – "Test 5: Encoder" of self diagnosis function.

  4. PF Motor assembly may be defective

  5. Main Board assembly may be defective

  I trust you will understand this and I hope this can help!…. it means nothing to me 🙂

Log In to Reply