-
Parking Numbers spiked sign!
Hi All
Looking for some ideas please.
I need to make small signs to hammer in to the ground, about 600mm high with a small plate with a number on it to indicate which flat’s parking it is.
A rough drawing attached but need some ideas of materials and manufacturing.
I know it’s a simple one but thought I would see if anybody had some bright ideas.
Thanks
Warren
-
7 Replies
-
Warren
if you have a grafityp brochure they do a product called stikit signs.
I cant find them on their website, but they may be what you are looking for? Not a 100% vandal proof thoughPeter
-
temporary or permanent Warren ??
-
just re read…sorry….. hammered in so temporary
-
Why don’t you just rivet it to a 25mm box square or right angle aluminium –
we used to fit them all the time like this.Hope this helps
Mark
-
quote Peter Normington:Warren
if you have a grafityp brochure they do a product called stikit signs.
I cant find them on their website, but they may be what you are looking for? Not a 100% vandal proof thoughPeter
I did think of those Peter but the customer wants them quiet high and also not so big 😕
Thanks anyway mate
Warren
-
quote signsLeeds:Why don’t you just rivet it to a 25mm box square or right angle aluminium –
we used to fit them all the time like this.Hope this helps
Mark
Hi Mark
That sounds like a quick, simple and strong long lasting option.
Thanks mate
-
I’d agree, it is a good option, we also cut the bottom of the angle to 45deg to make it even easier what whap into the ground.
G
Log in to reply.