• General Printing Topics

  Print – Laminate – Cut using Wasatch

  Posted by Mike Robson on 30 November 2006 at 15:10

  Anyone know how to do this easily?

  At the moment, I’m having to create 2 files, 1 with just the print image and one with just the cutpath.

  I’ve seen an online guide using different RIP software, which has a check box to ‘enable cutter’ that you disable to perform the procedure. I can’t find anything like this in my software though (Wasatch SoftRIP – Version 5.2 – Roland Edition).

  Any help would be much appreciated.

  Thanks
  Mike

  Mike Robson replied 18 years, 11 months ago 2 Members · 2 Replies
• 2 Replies

• 

  Phill Fenton

  Member

  30 November 2006 at 16:30

  Go to the print menu – then click on "setup" then "edit" then "properties" then "Cutter". There you’ll find the check box so you can uncheck "enable cutter". Save the new setting and rip and print as normal. This will automaticaly produce a cut file that you can use later after laminating which you will find in the "cut" menu.

• 

  Mike Robson

  Member

  30 November 2006 at 16:34

  Spot on. Thanks. Been looking through for ages. Must have just missed that. Was getting the cut files generated, but couldn’t stop it from cutting before laminating.

  I’ll have a play around with that now.

Log In to Reply