• Roland Printers

  pc 600 question

  Posted by Derek Heron on 10 February 2006 at 17:05

  before i run some tests or even worse read the manual can any body tell me the max print height from a single pass on my pc 600

  thanks Derek

  Chris Wool replied 19 years, 7 months ago 4 Members · 5 Replies
• 5 Replies

• 

  Jason Bagladi

  Member

  12 February 2006 at 19:22

  The ribbon is 13mm so I would guess just a bit less than that.

• 

  Derek Heron

  Member

  12 February 2006 at 19:39

  thats what i presumed but ran a print of 10mm high and it went in two passes?

  any ideas

  Derek

• 

  Mike Grant

  Member

  12 February 2006 at 21:06

  The Colourcamm works on a set grid pattern. if the top of the letter is only 1 tenth of a mill over the gridline it will make a pass just for that little bit. It is really annoying and ribbon wasting but you have to live with it.

• 

  Derek Heron

  Member

  12 February 2006 at 21:17

  thanks mike thats stopped me going mad i tried nudging it up and down to no avail some you win some you lose

  regards
  derek

• 

  Chris Wool

  Member

  13 February 2006 at 10:14

  hi
  the pc60 is a 8mm print width. as mike says the printing grid starts at the plotter 0 0 so a 10 mm letter could be 3 passes.

  chris

Log In to Reply