-
what would you charge for this?
Hi Gang, hope you all had a good’un!
what would u charge for this, 2 stripes front to back fitted?
havent done one of these yet.
cheers peeps
😀
Attachments:
-
6 Replies
-
It looks deceptively easy but can be very time consuming. Consequently charge about £150 + VAT or it’s not worth doing.
-
Ok i know its not exactly the same, but…
http://www.uksignboards.com/viewtopic.php?t=14967
this has the numbers on that you havnt got, but we charge £120 + vat, inc fitting for these, as they are a good customer.
But a one off, should obviously be higher
-
I’ll go with Phil, looks easier than most, but the job is worth £150ish
but go higher rather than lower if you can.Peter
-
any tips on how to fit the strip into the back numerplate reses? 😮 how the hell am i going to ‘mould’ it into that?
u might just be able to see from the photo
Attachments:
-
Phils on the money
del id take the plate off and run under, looks like you might have a little cut and shut to do there – use a cast vinyl for the curves amd maybe make a template first
John
-
As u you see from the photo the number plate recess would be practically imposible to do in one piece, even in cast material. There is also a light in the side wall of the recess which doesnt help. If you definately have to go into all the nooks and crannies a pre-mask template then cut the inserts. Dont think the number plate is you biggest issue, the compound curves and extreme angles are.[/img]
Attachments:
Log in to reply.