[RayRosher]

Cool thanks Joe

quote Joe Killeen:

quote RayRosher:

Hi all does anyone know were I can get a repair done or a new//newish.. board..for my Roland DG Camm-1 Pro CX500. Serial number is ZQ61767…….I think its the newer model. any Ideas anyone

I have a Roland camm 1 sitting under a bench in the workshop. I will check the serial number on Monday I think its quite old. If it is if use to you just pay the shipping.
Joe

Cool thanks Joe

[RayRosher]

Thanks Phill

[RayRosher]

Phil! you have way to much time on you’re hand’s…

[RayRosher]

Yep what Nick said!
Bike graphics are few and far between. been looking for years myself the problem is that the manufacturers change their bike models every year to get sales!
And then either don’t do the vinyl or charge an arm and a leg for them if you need them replaced

[RayRosher]

Thanks Kevin!
Looks like a nice carefull clean is in order! Dusty from lack of use!

[RayRosher]

quote DavidRogers:

Such pride in a the world’s most famous disaster.

“You know WE built the TITANIC”…

You don’t hear the builders of many other doomed-by-design structures with a high death toll remark that with such fervour!

You Mean T1T ANIC

[RayRosher]

Yeah sounds like the servo Version, look on the backplate it should say servo or stepper! Servo’s better!

email then, their usually quite good, let them know the model and that you need drivers! mind you the site is pretty rubbish!
Used mine for a couple of weeks then bought a Roland CX500

[RayRosher]

Make sure the one you have is the stepper motor and not the servo, i think that the servo version was either black or very dark grey, stepper was i think white in color

[RayRosher]

quote James Hughes:

Sorry to hijack the thread, Paul is there any chance I can get a copy of the foison driver disk ? I’m in the same situation moved house, lost disk and computer had to be reset to factory settings !
Only difference it’s my only plotter at the moment !!!

Try these James, first one is a word doc about the drivers 2nd is i think the correct drivers 3rd is the main home page

http://www.foison.net.cn/en/newscontent.asp?title=56

http://www.foison.net.cn/en/newscontent.asp?title=49

http://www.foison.net.cn/en/home.asp

[RayRosher]

quote Cheryl Smith:

quote Martin Cole:

It seemed to give off heat when it was visible.

Looked like picture below..any ideas 😕 😎

Blimy…I caught a glimpse of one today too….had to take off my cardigan for a whole five minutes…!

Dude!
Cardigan?

Really!

[RayRosher]

Thanks Stafford
never found a problem with the printer with border less printing turned on I can get well over a 24" print

[RayRosher]

Dam you I pad and spell checker

[RayRosher]

Yep about 20 to 30 metres for a USB repeater
However I was goingt ot suggest a cat 6 cable with if need be a USB converter to Ethernet converter at the ends their as far as I can tell also a Ethernet system that you can run via your power supply as long as the items your connecting are on the same line. Fleabay is usually e best bet for his.

[RayRosher]

Yes Denise
Bad Bad Bad Bad Bad Bad

Thanks!

[RayRosher]

quote Cheryl Smith:

WHAT! that watch cost over 2K????!!!!!!!
goodness me!!

Cheryl!
That’s a cheap one! Some of them cost twice that much!

[RayRosher]

To late Mike!
Joined Last week! Same user name!
Like me Hyosung’s!
Had the naked version of this!

after all if hyosung make the Intruder and Maurder for Suzuki (Under License) Then they can’t be all bad!

[RayRosher]

H’mm! Not a great fan of Carbon,
But I have to admit that Robs video looks nice!
Think I’ll give Hexis a call on Monday see what they have carbon fibre wise!
Thanks Guy’s

[RayRosher]

Sorry forgot to post the other Side

---

Attachments:

[RayRosher]

Not sure if you got a camera yet! but i would stick to fleabay! as their are some great bargains out their if you know what your looking at!

I bought a Nikon D2X 8 Months old with about £400 worth of Extras! Just short of £5000 Worth when new!
It still had 16 months to run on the warranty and I paid just a tad over £1100 for it,
However budjet is the main thing here I would check out http://www.kenrockwell.com/nikon/d60.htm
This guy really knows his stuff

Mind you I agree with him about the D40 being a better camera than the D60

[RayRosher]

quote Robert Lambie:

UKSB Sign Toolbar under the UK Resources tab, then “journey plan & calculation” I tend to use the RAC one if i am looking for a quick reference.

Now! Rob, Your just showing off!

[RayRosher]

quote Robert Lambie:

How come i get the blame, It’s not me putting him down the hole? :lol1:
that lads 6’3″ tall… think when they do bury him, it will be in a snooker que case. :lol1: his face is priceless, it is normally him pulling all the pranks.

Funny enough the camera was out because its going to be a tutorial on the boards. :lol1: :lol1:

What Rob!
a Tutorial on how to bury someone the right way up!

[RayRosher]

depends on the box and materials used

[RayRosher]

Think that flexi starter only came/comes with the lesser known cutters ie pcut etc,
And is locked to the machine that it came with! I Would look on flea-bay but beware ask the questions if anyone is selling flexi cheap it maybe the starter pack for a specific machine,
Vinyl-master is quite good though

[RayRosher]

Hi The guys on here will try to advise you the best they can! Perhaps a little background information would help, ie your setup at the moment! how long you’ve done this!
If your new to this business! Then please say so as some of the tech speak can be a little daunting, (some members will assume that your already at a certain level)

This business if you can make a business out of it! Is baby steps,
Run to far beyond your experience and you will definitely get burned!

If your trying to do print and cut without even knowing how to weed simple cut vinyl properly then your hitting several problems straight away! (Just an example)

It may look like theirs loads of money to be made at this Game! but to be honest, Their really isn’t that much profit if your going to get the reputation of doing a good job then decent quality materials and your time factor into this,
to be honest if this is your first dabble into the vinyl business, Then a must have is a vinyl cutter, Not print! Not print and cut! Just vinyl, Printers are fine for art work! and graphics, But what if you get a job and the customer wants a bright single colour Orange,or Black, or Green(try printing Orange on your current printer) unless you have one of the more professional printers! Printing any color is extremely expensive to print and the final outcome can leave lot to be desired, when you only need a single color, Better to just cut it out of standard vinyl,

Look on flea-bay for just how cheap and nasty some of the quality and vinyl is, For most people this is usually good enough But not if you want to get a reputation for Excellent quality and workmanship!
Martin made a comment about buying in what you need to begin with! An excellent Idea!

Anyway I’m going to stop now as this comment started out as a what he said!

[RayRosher]

Yep! Flexi for me! But Ive seen Vinylmaster and it’s pretty good and a fare bit cheaper than Flexi

[RayRosher]

I would listen to peter on this one! This machine is now obsolete and not supported in any way by Roland,
In fact not sure were you would get any parts for it only place would be flea-bay if your lucky! could only find one seller for the ribbons

[RayRosher]

from what I can remember you need to have the drivers installed for this printer in whatever operating system your using xp i think is one of the best and last supported by Roland the flexi driver is just that a flexi driver for the management editing panel.
I also if i can remember! you need to rig the printer up via a Ethernet cable adapter via your parallel port as this stops the printer from going into standby while its printing

[RayRosher]

http://www.aria.co.uk
Knock yourself out!
i buy all of my stuff from this lot excellent prices

[RayRosher]

quote Brian Little:

quote Gwaredd Steele:

quote Adam_Randell:

i have seen companies on ebay selling stickers for brake calipers.

I’ve also seen those. They usually are sold by the same guys who flog the Subaru Imprezza Rally set for £60.00 😮

hey thats a great price you got there number 😀

Yeah! It’s 0990 Imamug

[RayRosher]

Go for it M8
Not sure how rates are worked out, But one company that had units told me that the rates are based on 50% of the rental value ie if your rent is £8000 then another £4000 on top of that for rates this was about 5 years ago mind,
What they also told me but i never took them up on the unit was that they would tell the rates department that the rent was half of the amount I was going to give them bringing the rates down, Dishonest yeah! but apparently their are ways of adjusting the money for other things.

[RayRosher]

quote Phill Fenton:

I don’t understand why vehicle wrapping is such a competitive market.

It’s difficult, time consuming and expensive (in terms of materials) so why are so many companies trying to compete when it’s so much more lucrative to do vehicle signs in cut vinyl?

In terms of materials cost and time spent pro rata – vinyl lettering generates much greater profits

Well Said that Man!

[RayRosher]

quote Peter Normington:

quote Hugh Potter:

blimey Pete!

there’s a bit of a sean connery / rowan atkinson love child thing going on there! top suit too! Lynn reminds me of one of the women from bergerac, long time ago so not sure who i’m thinking of!

Shane, the toughest drag car i owned was pink, tell him to man up and just have some nice lillies or orchids on there!

thanks mate (Click the image)

Somebody as far to much time on their hands And should be printing or cutting vinyl!

[RayRosher]

Yep! Vector Magic and then a tidy up in flexi if it needs it

[RayRosher]

Yep Dells basic support is well pretty crap
but if you pay for the business support then their spot on,
My friend had a problem with his Dell, they couldn’t fix it over the phone so couriered him a new tower and sent an engineer the next day to fix it both turned up at the same time
Like waiting for a bus

[RayRosher]

Hi Peter
Dell are pretty good even though they run pretty hot most of the time.
However know what you mean, with regards to dell and hp stay away from hp they use pretty crappy m/b on nearly all of their systems I know I used to work for them and their Shite
can’t help with a supplier! As I have only ever built my own machines and have never had to resort to off of the shelf pc’s
if however you did want to try and build yourself then http://www.aria.co.uk do some pretty good deals on components and complete machines
mind you Hugh and Dermot are spot on use a local guy a bit more expensive but sometimes worth the extra for handy-ness

[RayRosher]

quote Phill Fenton:

I can’t help but think that what they should have invented was a pair of glasses (the visual equivalent of headphones) to plug into the ipod machine to create the ultimate portable device.

they already have Phill ]
But their about £250 on flea-bay

[RayRosher]

with regards to flash and the ipad one of the main reasons that jobs wont let flash onto his apple wares, well their are a couple of reason but one of the main ones is security! Flash is now so bloated and vulnerable with security flaws that jobs wouldn’t let it near an apple mobile product in a million years.
PDF reader is now so bad that i only use it on a system that I don’t connect to the net. or I use foxit which to be honest is-int much better.

HTML5 is some say the way forward as it doesn’t require flash However their have recently been quite a few security problems with html5
The trick with adobe is to update as often as you are able to! And then stay off of the net with that system if its a main system computer adobe only update on the 2nd Tuesday of ever third month! You will have a pretty long wait if their is a zero day vulnerability, And their are a lot of them out at the moment, Zero day is a security flaw in adobe that they don’t know about yet! But the bad guys do know about, And use it to exploit your computer I’m cutting myself off now as this could easily turn into a 5000 word doc about adobe and it’s flaws,
if your at all interested in the adobe problem then go to my mate’s website Steve Gibson http://www.grc.com
also he does a pod-cast which is actually very good called security now.

Ps I love my Ipad even if it sounds like a ladies product,
but if you want to read books get a kindle wifi is £109 at the moment and the screen e-ink system is as close to a book as you can get!

[RayRosher]

quote Phill Fenton:

Okay – you first Jill 😮

H’mm Strange! Everyone seems to want to see Jill nekked for some reason.

Form an orderly Queue

[RayRosher]

quote Jill Marie Welsh:

Lynn you and I could pretend to have a falling out and then everyone could lurk and that would make a bunch of people logged it.
Although I already just gave it away.
😳
OR
that could be the day we all post nude pix again for the 2011 calender!

Sorry! I still prefer the lap-dance idea. (From another Thread)
The calender I’m up for, You And Lynn First Jill.

[RayRosher]

Nice!

Makes me want to Dig my brush’s out and start sign-writing again!

Then again maybe not!

Considering that I could probably knock that off in 20 minutes with my cutter.

It seems a shame! that the old skills are dying out,

[RayRosher]

Yeah! Like it!
Hope they did something about the rust around the door though!
Scabby paint work detract from what is a very nice job,

[RayRosher]

Ask about our Payment Terms,

100% Down! Nothing to pay each week.

[RayRosher]

quote Jill Marie Welsh:

I have a rather wordy little sign out in the office but it’s worked for me for many years. Some of it is:

So sick of people expecting a free lap dance just because they deigned to stop in.
Hahaha I’m kidding about that part.
Love…..Jill

H’mm Free Lap Dance, Huh!
You tube video please! Thanks 😮

[RayRosher]

You could try Spinrite
http://www.grc.com/intro.htm
Expensive if your only going to ever use it once, But as i have about 40 hard-drives i use regularly and boy does it save the day.and will work on anything

[RayRosher]

quote Jill Marie Welsh:

Then I am not going to do diddly squat for a whole day!
:lol1:

H’m-mm He’s a rapper isn’t he :wow: (<( 😮 :tongue:

[RayRosher]

:lol1:

[RayRosher]

quote Jean Oakley:

Hi this stuff is a real pig to remove whatever grade. I do repairs to a lot of fire engines and this is what i do to remove it. I use a scalpel to lift an edge push it in as far as it will go. do a few times next to each other, Then get a metal ruler and push and wiggle it as much as you can it should lift it in small sections (big if your lucky) but i seems to work without leaving the white behind. Once done clean with siprit to remove any little patches of glue. Its a long process but if it has to be done then this is how i do it
good luck

I would have thought that applying a little heat while doing this would help.
Or am I wrong….

[RayRosher]

trichloroethylene
In-fact i think that we used to just call it Trek..
or the lung destroyer if you breathed in the fumes!

Boy that takes me back!

We used to use that years ago to clean engine parts, and when I say Clean, I mean you could take the crappiest engine part and it would come out brand new stripped down to the bare metal,
we used to use an old bath with gas heaters underneath it and running water around the top of the bath to keep the vapor in,

Mind you their is nothing and I mean nothing like it for cleaning metal.in it’s vapor form,

It was pretty much like any cheap engine cleaner in liquid form,

H&S would have a Hairy fit if we tried anything like that now.

[RayRosher]

quote Peter Normington:

A vebal contract is also binding in England,
the problem arises when you need to proove it, without witnesses, a verbal contract
is easy to deny. and not worth the paper it is written on 😉

Peter

I would have thought that the fact that the goods were delivered ready to install would be all of the proof that would be required,
Buddah bless digital cameras because most of the time a picture is the only proof that you need !

[RayRosher]

quote Gareth Howells:

sorry for the late reply, been a busy week. i have another business also selling and repairing laptops…

thanks for all the help. perhaps a page on the site with links to good suppliers would be a nice idea?

`thanks again everyone

Err! the links are already here or you could just download the toolbar

[RayRosher]

??

[RayRosher]

quote Jill Marie Welsh:

quote Johnny Alston:

Have you got anything in writing or email saying go ahead?

If not then tough its your word against hers that the she had agreed on the work all she has to say is that she was only wanting a price and asked you to match a layout.

Take a leaf out of some of the franchised business out there. I recently used one high street printer.

Signed order form confirming the price form clearly says I was happy to proceed.

Deposit required before the start any design with full payment required before the job went into production.

An expensive lesson I wouldn’t waste any time in small claim unless you have anything in writing.

I agree with this.
Deposit, then sketch, then signed approval. Full payment upon delivery.
No exceptions.
Not sure what recourse you have if you don’t have anything in writing (assuming you don’t)
Seems fishy to me that her hub would have gotten her new signs, did she leave you a voice mail or email while you were away to complain about (her) mistake?
I wonder if she’s paid the other company.
She may be a serial rip off artist.
I think I’d have Geoff sneak onto the roof of the place and drop something stinky down into her heating/cooling unit.
I’m kidding!
(sort of)
Karma will get her, in the meantime send a registered letter (that she will have to sign for) with the invoice for what she owes you.
Love…..Jill

Actually in Scotland a verbal contract is binding. most Scottish courts take a dim view of people reengaging on any kind of contract even verbal

[RayRosher]

quote Shane Drew:

employ a debt collector. They know all the avenues that people try to escape payment. They also know the law. Our collection agents charge on a sliding scale here, no doubt yours do to.

You have her original artwork, she accepted delivery of the sign, it is as good as a signature.

If she does not respond to your demand for payment, outlining the details as to the error being hers not yours, a collection agent is the next step.

From experience, they’ll usually respond from the initial threat of legal action..

I go with Shane’s Debt collector as Ive done this a couple of times And it works!

[RayRosher]

I wouldn’t bother with the usb to parallel cable as most of the time for things like this they don’t work,
Just try hooking it up to an old PC see what happens

[RayRosher]

Vectormagic do a online or standalone pc version,
I have the standalone which is pretty good!
However if your using flexisign you can vectorise it in that,

[RayRosher]

quote Nicola McIntosh:

not my cup of tea but i like it for some strange reason 😀

nik

Yeah Agree
But man-o-man Soooooo Tacky

[RayRosher]

I prefer Jills responce!

[RayRosher]

Actually IT may well be a vbscript and flash problem

[RayRosher]

Sorry flexi file not uploading I think it’s not allowed

[RayRosher]

Hi not sure if this is any good to you as i only had a couple of minutes to do it you may need to clean up and change some of the colours to black as i think that i may have converted this in color (don’t have time to re do Vector and flex enclosed, both need tidying

Re Ray:)

---

Attachments:

6cm99cwb.eps

[RayRosher]

quote Peter Normington:

I presume the substrate is stainless steel, was it totally dry before application? it can by its nature attract condensation, and what grade of vinyl did you use.
Some vinyls do shrink more than others, and a 3-10mm overlap is advisable.
Peter

Peter
if the van is a snack bar then the substrate is usually made of Glassanite much like most of the container trailers on the road today if not then it’s probably aluminum.

[RayRosher]

quote Martin Cole:

any good 😉

This might just do the Job!

I’ll take two!

[RayRosher]

quote Martin:

Ray, nothing on the bottles to say who makes it or where I got it but did a google search and found these.

http://www.raidius.com/UK/clean/icecreme.html

http://www.raidius.com/UK/clean/icecreme.html

http://www.bayplastics.co.uk/plasticpolish.htm

The top links are the stuff I have the bottom one looks to be the same sort of stuff. The option Nicola put up is probably the cheapest so might be worth trying first. Can’t remember if I tried windolene when I was looking for something to remove scratches from laptop screens so can’t comment further on it. For general cleaning I just use IPA.

Thanks martin

ordered a bottle of the Ice Crerme as I have a few monitors now worth keep in stock as a just incase

[RayRosher]

James, auto-glass ill look out for some.

Thanks Martin!

Nik Windowlene
H’m Interesting may try that If nothing else comes along

[RayRosher]

quote Jill Marie Welsh:

Did I tell you that I also have two sheds?

Oh God!

To
Much
Information.
😮 😕

[RayRosher]

So are we going!
Benny Hill
or
Monty pythonish with the knocker jokes.
Just so i know! 🙄

[RayRosher]

you did the right thing m8
What if it had been a Child walking your dog.

[RayRosher]

quote Graeme Harrold:

Spelling mistake I would kindly direct back to his designer, and it might be helpful if you can post pics of the lifting vinyl.

Yeah Agree!
if you had done the art work and it was your mistake then then I would expect that you would have to replace it!

But as it was his designer who did it then it’s down to him to make sure it’s correct.

[RayRosher]

Well Done Mate!
H’m! It would seem this approach works,
That’s one Idea getting stored away for possible future reference.

[RayRosher]

point taken Peter
But what I can’t understand is why if they Were having Financial problems would they order £4500 worth of products

[RayRosher]

quote Angelique Muller:

quote Dave Rowland:

some dongles light up when they are in use.

i thought the system restore/windows update must have done something, I couldn’t think of anything else.

Yep… mine lights up… So if it was the windows update… what do I do? Re-install?

No Go into programs accessories, System Tools and then find system restore go back to a point when you knew the dongle was working and try that

[RayRosher]

I would have thought that behaving in the spirit of things. Peter should also mean that the Golf Club pays, David for his time and expense in a timely manner This hasn’t happened,
I think that the flack the club will get because of this Could go either way!
They will fold in which case Davids no worse off
or
They will lose face and stump up pretty dam quick
I go for the pretty dam quick option myself.
Failing that i know a couple of hairy Arsed Bikers (No they can’t cook) who will get the money for you!

[RayRosher]

The serial to usb adapters don’t usually work unless it’s for something like a older games pad ie old serial M/S sidewinder games pad,
probably better to just get a plug in card for your PC

[RayRosher]

it’s unlikely that your going to get someone to just give you an outline Mark!

If you have the impact DVD then contact them direct they will send it to you via email,

However these discs are so expensive that most hold onto them like gold-dust.
you might be able to pick one up on flea-bay

but Impact wont give you any support for it and if you don’t get the book as well then your screwed with regards to finding the correct model without trawling through hundreds of images

If you buy a disc from impact they will give any updates for up to 1 year i think

[RayRosher]

Not sure if I’m allowed to put the link so the item number is 260522037242 Flea-bay about £50 and cuts up to 10mm I think that you can also change the size of the corner with different type blades although not sure about that

[RayRosher]

Better if you can post pictures if you get a problem like this as it lets us see whats happening

[RayRosher]

Dam-it it Paul why did I have to miss this one.
what else you got

[RayRosher]

Or as Henry Ford once said you can have any colour you want as long as it’s Black

[RayRosher]

not sure about price
But i have heard of glass cracking and shattering if the wrong vinyl is used

[RayRosher]

Windows do an automatic update on the 2nd Tuesday of every month,
if you have auto updates turned on, it is possible that windows change something in it’s system that could have caused your problem also you say you have the program on a laptop have you tried that to make sure that it’s no the dongle

[RayRosher]

not sure if this Will help
but it could be a windows problem try doing a restore to an earlier restore point

[RayRosher]

Photographs
Price
and
amount of running time left on the heads and capping station would help

[RayRosher]

No picture
You forgot to add it…

[RayRosher]

Oh!
And thanks by the way
I now have an image of Peter and his Pink undies in my head,(oogle) :yikes: :yikes: (oogle)
THANK YOU SO MUCH! ROB!

[RayRosher]

Very Good Babbling Rob and Almost exactly what I was thinking,
And Yes I have /Am doing the cheap and nasty 3 for a £1 Crap,
it’s very basic bread and butter money, But that’s all
Any decent jobs come in and the B&B stuff gets put to one side…

[RayRosher]

Yep I am and have been all of the above 🙄

[RayRosher]

How About some details on your printer setup IE inks printer substrate etc
This will give us a better Idea on were you are equipment wise,

Problems with pigment inks and outside usage are numerous,
OK Pigment Inks will regardless of what the manufacturer says,
Fade like hell in Bright sunlight,
If you use a good quality UV laminate And I mean! A Good quality laminate
Then you may get a year or so out of the print
This is provided your using a good quality Ink,
I know I spent a week or more researching this,
What I came up with is that Pigment inks are superb for indoor use, Although i would still laminate, Even for Indoors,
Substrate is another problem, I know Hexis do a vinyl for pigment ink and outdoor use but they insist that it must be UV laminated and it is for short term usage, best to talk to their technical dept,

Here’s what I would do in your boots, stick with the indoor jobs for your self, Then if you get any outdoor work, Do the art work and as much of the work IE finished fileas you can, Then find someone in your area who can do the outdoor printing and laminating for you,
I know this isn’t Ideal, and their wont be as much profit in it for you But at least this way it will take the burden off of you in the short term.

[RayRosher]

quote Dave Rowland:

Try Apple Cinema display if your running cheap monitors, then again quite a few of the cheap monitors have good gamuts these days.

Then look at calibration after that… dont both with tuning crappy old displays

Also LED backlit monitors are certainly worth a look at

Unfortunately I’m not using a Mac so the apple cinema display is out unless it’s a windows program,

I would also need it for either with an add-on or built in Printer calibration So what I see on the screen matches what i actually get of of the printer….

[RayRosher]

quote Jill Marie Welsh:

Not sure who the woman with the big ( oh i swore ) is.
Love….Jill

What! Were! Who
Dude!

Jill!
Dam-it, I Hate it when you Don’t give us a decent picture, :lol1: (>) 😮 😮

[RayRosher]

quote Richard Martin:

quote RayRosher:

quote Hugh Potter:

Oh Man! I’ve got to start drinking less Coffee

You into urbex by any chance??

Not Exactly!
Although I do like the Idea of some of the More secret underground buildings and their history,
Getting access can be a bit of a bugger as most of the time these buildings are still owned by the DOD
As with most things H&S stops me more often than not from gaining access to older buildings. Dam them!
Old derelict Hospitals are brilliant for getting the correct atmosphere, Anyway sorry wrong forum for this kind of discussion,

Anybody looking for Information on this here’s a pretty good Site
http://www.sickbritain.co.uk/2009/03/ur … ploration/

[RayRosher]

quote Martin:

Reason I ask is that I now use a laser thermometer all the time when doing any sort of work with recesses. When I first got it I tried the old heat it till its about right method to see how accurate I was and I was surprised just how far out I was some of the time.

Yep! i got one off of flea-bay 1/3 the price of some of the signage Sellers. well worth the £15 investment and exactly the same models as a couple of well know sellers on this forum.
Sometimes flea-bay does have it’s uses

[RayRosher]

Dam it!
Peter
Posted Just when i can’t afford,
Could you not have waited a couple of months before posting this,

Looks like a nice piece of kit,

[RayRosher]

Phone Hexis tech support and let them know whats happening,
They were great helping me get the correct wrap materials sorted

[RayRosher]

quote Mo Gillis-Coates:

trust me it works………. hard to walk with balls this big tho :lol1:

Hey Mo,
Thought you might like these,
Take the weight off your! Hips. 🙄

Well if this one doesn’t get me banned?

---

Attachments:

[RayRosher]

Should have just waved :wave3: at her and got on with it m8,

That’s what I would do, But that’s just me? :yeeha: :dance1: :cheer: :giggle:

[RayRosher]

A couple of options
http://www.gotomypc.co.uk/remote_access/remote_access
and gotoassist.com are the same company both are good for what they do
How ever both are are monthly or yearly paid software
Worht a look though
Re Ray:)

[RayRosher]

Yeah
I have to admit I’ve bought from them and their always friendly and good with their prices

[RayRosher]

I actually bought the Impact H&S and the Library disc newest versions and have to admit that they were OK

but the library disc was pretty disappointing with regards to bike decals just basically a mish mash of vectors, nothing complete as in full decal sets.
how ever it might be worth asking them as i know that they don’t put everything on the disc Re Ray:)

[RayRosher]

Hi David
How about putting the name in a joinery type box
IE toolbox and then substituting some of the letters for tools IE the T could be a claw hammer the I could be a Screwdriver etc
Just an Idea

Sorry!
Just noticed theirs no T in the name Duh! Me
Anyway you get the Idea

[RayRosher]

quote Hugh Potter:

some fair points Roy,

i’ll therefore consider doing them!

as for pics… yes, i agree, was taking pics of the millenium stadium, also at jaunty angles like yourself, and was asked by some hi-viz’d up chap what i was up to, this is despite being in a Wales rugby top, wales wooly hat and scarf, on match day, hmmm, he didn’t tell me to stop so not sure what he thought i was doing!

ps,
got a much smaller lense than you if yours is 500mm, mine only goes to 400 🙁

Na! Hugh I have to disagree again!
it wasn’t the camera that did it it was the rugby gear. :lol1: