Find answers, ask questions, connect with our community.

Activity Feed Forums Sign Making Discussions General Sign Topics do you let doming dry naturally or apply some heat? Reply To: do you let doming dry naturally or apply some heat?

  • David_Evans

    Member
    April 1, 2008 at 9:17 pm

    Ive just done my first ever 200 tonight! Wasn’t perfect but i now know for next time.

    Basically apply around 2 thirds of fluid to the sticker and DO NOT move them for at least 30 mins to an hour. I used the supplied heat gun to remove any bubbles (only on about 10 though) If you keep the cartridges upright for 30 mins before use and when putting in the gun this helps the nitrogen to rise to the top.
    I used 3m spray mount on the back of the stickers so they laid perfectly flat. I made some stackable shelves out of foamex and some raw plugs.
    Now they are all stacked away with a plastic box over them and eagerly waiting for them to cure.

    I think moisture is your worst enemy but that’s not a problem at 2100m where i live.

    Hope That helps

    Dave