- MemberDecember 20, 2005 at 11:25 pm
Cheryl if you have not got the windows print driver disk then you will need to ring Grafityp so they can e-mail one over. (Technical Dept. ask for Paul Shrives)
When in Corel you select line thickness to the smallest setting ( I think its hairline / outline) then you need to manually reduce the line thickness to 0.001 mm. This way the cutter will see it as a single line and will cut it out, beware though anything set above 0.001 mm and the cutter will not respond to any job sent.
I’m at home now taking the rest of my holidays but I will look in each day so if you need any further help just post.
Find answers, ask questions, connect with our community.