Find answers, ask questions, connect with our community.

Activity Feed Forums Cutter Discussion Mimaki Cutters Servicing a Mimaki CG130 FX

  • Servicing a Mimaki CG130 FX

     John Lacey updated 6 months, 3 weeks ago 3 Members · 4 Posts
  • Paul Hughes

    Member
    January 18, 2020 at 9:59 pm

    Anyone able to recommend a decent engineer able to service a Mimaki CG130 FX at a sensible cost who covers the North West? Cheers

  • Paul Hughes

    Member
    January 20, 2020 at 10:06 am

    My problems are going from bad to worse now. Any ideas why the carriage should stop working? The cutter switches on and the LCD does what it has to do, but on the last switch on, the carriage is totally lifeless. Is there a small fuse specifically for the carriage or something else I might be missing? All advice and help would be hugely welcome. Thanks again

  • Robert Lambie

    Member
    January 20, 2020 at 11:09 am

    Have you tried Printmax?
    https://www.printmax.co.uk

  • John Lacey

    Member
    January 20, 2020 at 2:34 pm

    You have the same cutter as me – mine was supplied by a bloke called Anthony Rinburg about 13 years ago – i’m trying to contact him so i’ll let you know if he’s still about..

Log in to reply.

Original Post
0 of 0 posts June 2018
Now