Find answers, ask questions, connect with our community.

Activity Feed Forums Vinyl Cutter Discussions PCUT Vinyl Cutters Procut 700 blade lifting in middle all the time

  • Procut 700 blade lifting in middle all the time

  • SunnyCUT

    Member
    March 21, 2016 at 3:01 pm

    Hi

    Whenever I try to cut the blade won’t cut in middle 100mm of width. Regardless of the design etc the blade lifts up (to not cut)

    I have checked all communication settings etc

    It worked fine previously and now is doing this. If I move blade on x axis using settings on cutter that is ok cos blade is in up position already.

    Any ideas on what to do please?

  • Chris Wool

    Member
    March 21, 2016 at 6:13 pm

    if its the same place on every file you cut then guess the main ribbon data cable is faulty having a intermittant contact

  • John Thomson

    Member
    March 22, 2016 at 8:23 am

    Do you have a static cable fitted?
    Chinese machines use electro magnetics to raise/lower the blade…….could be a static electricity issue.

    john

Viewing 1 - 3 of 3 replies

Log in to reply.

Original Post
0 of 0 posts June 2018
Now