Find answers, ask questions, connect with our community.

Activity Feed Forums Sign Making Discussions Neon, LED, Lighting Help – LED driver help and software

  • Help – LED driver help and software

  • glen walker

    December 15, 2019 at 2:05 pm

    I have been given a rather nice 2004 Led Sign, the type you can programme and it flashes up messages. Its quite large at approx 6 foot and although quite old we thought it would be rather nice to put in our shop. It was originally supplied by a company called Pop up signs (no longer trading) and has no manufacturers name on it. It has a power lead and a usb lead.
    It currently all works with the previous owners message on it. when i plug usb into the computer the computer acknowledges the plug in with a "beep" but does not recognise the device. So I presume i need some drivers and or software. Am I wasting my time or is there a reasonably easy solution.

    Thank you in advance for any help.


  • Phil Davies

    December 15, 2019 at 3:48 pm

    You may be able to find drivers from the hardware IS, or dismantle the sign and look on the board/PCB for model numbers etc. Take a pic as well as it may help. There could be identifying marks on the chip also. Then just Google-fu the hell out of the codes etc.

  • glen walker

    December 16, 2019 at 10:00 am

    Thanks Phil, I will open it up and see what i can find.


Log in to reply.

Original Post
0 of 0 posts June 2018