Graphtec FC8600-160 Cutting Plotter – FOR SALE
We are releasing one of our two large Graphtec cutters which we have owned from new and is a superb bit of kit.
The machine has been looked after in use and maintained to a high standard while in our care.
It looks and performs like new. (photo’s can be emailed on request & a running demo arranged at our premises)
We never like to release any equipment unless we know its 100%, so to that aim, prior to being offered for sale we removed all guards,performed a deep clean, checked all servo motors / bearings / drive belts / data ribbons etc…greased and silicone oiled components, and replaced the Teflon cutting strip, Vinyl cutting blade & sheet off cross blade.
In short, the machine is ready to go, and provide the new owner with years of reliable service…
Tech Spec as follows:-
Max cutting width 1626mm / Max cutting speed 1485mm/sec(machine ran at 300-500mm/sec since new)/Max acceleration 4G/ Optical eye on cutting head for reading registration marks/ Cutting pressure 20g-600g(machine used to cut 80 micron monomeric vinyl between 80g-200g per new blade)/ Minimum character size able to cut, 3mm high/ Cutting accuracy 0.1mm over 2 metres/ Sheet off function/ Heavy duty stand with canvas media catch basket
Supplied with:- Power/USB/Ethernet cables,User manual,Felt plotter pen.
To arrange a viewing or have any questions answered, please contact Mark Taylor on 0191 416 8844 or via email to email@example.com
Many thanks, Helen Taylor.
Sorry, there were no replies found.