Find answers, ask questions, connect with our community.

Activity Feed Forums Software Discussion General Software Topics Cutter Software suggestions for my Mimaki CG

  • Cutter Software suggestions for my Mimaki CG

  • John Lacey

    Member
    January 30, 2020 at 7:50 pm

    I wonder whether anyone could give me a bit of advice regarding cutter software. Many years ago purchased a Mimaki CG cutter and it came with FineCut software. So with the plug in i cut straight from Illustrator CS2. All was happy and tickety-boo for a decade or so until the old laptop i keep on the network just for cutting went pop. My work/design mac is running CS5 (look at me all millenium)! The trouble is i have lost the FineCut install CD that came with the cutter. I can’t seem to find a download unless you have the CD. So, do i just get another vinyl cut program (suggestions please) or does anyone know how muck Mimaki charge for the cut program from scratch? Seems to be some cut software on the tinterweb but not sure which way to go, any advice greatly received thank you, John 😆

  • Jamie Wood

    Member
    January 31, 2020 at 11:12 am

    I could burn a copy a nd post it to you if it helps.

  • John Lacey

    Member
    January 31, 2020 at 3:25 pm
    quote Jamie Wood:

    I could burn a copy a nd post it to you if it helps.

    Thank you very much – That would certainly help me out as i should be able to then download the update from the site and get me up and running again (and i wouldn’t have to learn new cut program)!

    You must let me compensate you for your time though..

  • Jamie Wood

    Member
    January 31, 2020 at 3:33 pm

    No problem, if you send me your address details, I’ll post it off.

    jamie@ashmanandclough.co.uk

  • John Lacey

    Member
    January 31, 2020 at 3:44 pm
    quote Jamie Wood:

    No problem, if you send me your address details, I’ll post it off.

    jamie@ashmanandclough.co.uk

    Cheers Jamie, much appreciated! make sure to include a return address so i can send you a drink mate!

  • John Lacey

    Member
    February 1, 2020 at 5:11 pm
    quote Jamie Wood:

    No problem, if you send me your address details, I’ll post it off.

    jamie@ashmanandclough.co.uk

    Well what can i say, there are good people on this planet, many thanks for your help over the last few days Jamie 🙂

Log in to reply.

Original Post
0 of 0 posts June 2018
Now