-
Metal Letter Bender
2012 Channel Letter bender
Located in Wigan
Also Included:
8 Bar screw compressor with low clocked hours
Soldering gun
Limited coil stock
All required computer equipment & software
Bends 1.2mm stainless steel, Aluminium and Let-R-Edge material to a max height 160mm
Edge/flange bending capability.
3 Phase Power supply required.
This machine was acquired from a long standing sign manufacturer who has down sized to focus on operating on a consultancy and re-seller type basis with high end clients in Ireland, with this an agreement was formed where by there was an initial purchase price of £5,000 with the remaining value of £20,000 paid over a set period of years by way of producing signage for them on the machine with a monthly order value cap in place.
The above suits both parties perfectly as the now sign consultant is able to sell the machine, and ourselves as well as securing a new trade customer have a machine with minimal capital outlay and at a much reduced cost due to the outstanding balance being paid off by way of order value inclusive of profit, with an agreement put in place by way of a contract.
Unfortunately we’ve been unable to have a 3 phase supply put into the building due to landlord restrictions (the machine was originally brought in on the understanding it was single phase), so we’re looking to re-sell the machine on behalf of our trade customer, to whom we’re still supplying other sign products too.
Appreciate the above is a little convoluted so I’d welcome those interested to contact myself and I’ll be happy to talk through it over the phone and / or you come visit to inspect the machine and meet myself, as well as provide a copy of the existing contact so that all T&Cs can be understood clearly.
It is genuinely a fantastic opportunity for somebody to acquire a very high end piece of machinery with very little financial risk, and one that we’re disappointed to not be able to move forward with.
There is also the option to purchase the machine outright if the above isn’t suitable for either party.
We have a on site forklift so can assist with loading, situated in Wigan 10 minutes from the M6 junction 25.
Michael Cunney
01942 243 341
Sorry, there were no replies found.
Log in to reply.