-
JV33-130 Ink cartridge problem
Looking for a bit of help if possible. JV33-130 half way through printing no magenta, printer shows 1 and 9 for both cartridges, removed the cartridge showing 1 and it was completely empty.
I assume there was a problem regarding the cartridge, either the chip or the ink content.
Ive replaced with a new cartridge,(using Nazdar from QPS) is it a case of doing an ink fill up to recover the ink?
Any advice greatly appreciated
Thanks
Bob
-
4 Replies
-
Bob,
ink fill should be enough…..if not a syringe will pull it through.
John
-
Cheers John, doing an ink fill at the moment, regarding the syringe, I done that a few times on my older JV3, not done it on this JV33, if I need any pointers I’ll give you a shout.
Thanks again for taking the time to post, much appreciated
-
Done a test draw, perfect.
Thanks again for the advice John
-
quote Bob Scullion:Done a test draw, perfect.
Always a relief when you see a perfect test print :smiles:
John
Log in to reply.
