• Buy – Sell – Employment

  Graphtec FC8600-160 Cutting Plotter – FOR SALE

  Posted by Helen Taylor on May 9, 2020 at 3:16 pm

  We are releasing one of our two large Graphtec cutters which we have owned from new and is a superb bit of kit.
  The machine has been looked after in use and maintained to a high standard while in our care.
  It looks and performs like new. (photo’s can be emailed on request & a running demo arranged at our premises)
  We never like to release any equipment unless we know its 100%, so to that aim, prior to being offered for sale we removed all guards,performed a deep clean, checked all servo motors / bearings / drive belts / data ribbons etc…greased and silicone oiled components, and replaced the Teflon cutting strip, Vinyl cutting blade & sheet off cross blade.
  In short, the machine is ready to go, and provide the new owner with years of reliable service…
  Tech Spec as follows:-
  Max cutting width 1626mm / Max cutting speed 1485mm/sec(machine ran at 300-500mm/sec since new)/Max acceleration 4G/ Optical eye on cutting head for reading registration marks/ Cutting pressure 20g-600g(machine used to cut 80 micron monomeric vinyl between 80g-200g per new blade)/ Minimum character size able to cut, 3mm high/ Cutting accuracy 0.1mm over 2 metres/ Sheet off function/ Heavy duty stand with canvas media catch basket
  Supplied with:- Power/USB/Ethernet cables,User manual,Felt plotter pen.

  To arrange a viewing or have any questions answered, please contact Mark Taylor on 0191 416 8844 or via email to mark@gotodvlc.co.uk
  Many thanks, Helen Taylor.

  Helen Taylor replied 3 years, 11 months ago 1 Member · 0 Replies
• 0 Replies

Log In to Reply